8 Applications Of Synchronous Motor


Motors and generators have become a common thing in all areas like industries, power stations as well as for domestic needs. With the rising demand for electrical-efficient and less power consuming devices, the new inventions of electrical devices can be seen. The basic calculating factor for motors is the power factor. And for different areas of work the power factor should be maintained at unity. And to maintain power factor at unity, different methods are used and synchronous motors are one among them.
Synchronous motor is a kind of A.C motor which is at steady state and the rotation of the shaft is in sync with electric current applied.
Following are some of the applications of synchronous motors:

●    These motors don’t have any load connected to it’s shaft. Thus it can be used for power factor improvement. And due to its capacity to operate at any electric power factor, it is used in the power systems where static capacitors are expensive.

●    The static motors can be used where operating speed is less for example, around 500 rpm but where high power is required. Since the cost of induction motor is high although can be used for 35kW to 2500kW, in these situations a synchronous motor can be easily used at an affordable price.

●    The application of synchronous motors can also be found in making robot actuators, ball mills, record player turntables etc.

●    When used in a high power and big industries, these motors perform two important functions, ie, converting A.C energy into mechanical energy efficiently as well as for power factor correction.

●    They are also used to regulate the voltage at the end of transmission lines.

●    Synchronous motors are also used in paper and textile industries to get a wide range of speed with variable frequency drive systems.

●    Synchronous motor is also used where high power at low speed is expected such as rolling mills, chippers, mixers and pumps.

●    It is used for loads where constant speeds are expected. For example, these are used in fans, blowers, and compressors.

Precise speed regulation makes synchronous motor the best choice for different industrial purposes such as the generators. The use of synchronous motors reduces the power utility and thus increases the efficiency as well as the revenues for industries.

For more details about synchronous motors and to buy synchronous motor please check out our catalogs at- https://www.ever-power.net/

Comments

Post a Comment

Popular posts from this blog

Get to know all about worm reducer: definition, working, and application

Image
A worm reducer is basically a cylindrical gear with one or more threads and almost resembles a screw thread. A worm gear allows the users to determine the rotational speed, and also helps for a higher torque to be transmitted. This mechanism can be found in devices both at home and in heavy machinery. The simplest and most common application of Worm gear can be found in an acoustic guitar. Types of worm reducer: There are mainly three main types of worm reducer: Non-throated: This is a straight worm without a groove machined around the circumference. This type of worm gear is subjective to high unit load and wear and tear. Single- throated: In this type of worm gear, concave helical teeth are wrapped around the worm for a line contact. This provides higher unit loads with less excessive wear. Double- throated: This type of worm gear has concave teeth on both the worm screw and the gear itself. This leads to increased unit loads with lower wear and tear...
Read more

Pulley and Sheave: Difference

Image
Sheave pulley Pulleys have been used by mankind from time immemorial. They are used to make lifting heavy objects easier. A pulley allows a person to lift a particular load with less effort than what would have been required without a pulley. They are typically made with ropes and wheels. The term pulley is interchangeably used with the word sheave. This is not correct as they are different things. Here are the differences between a sheave and a pulley:- The basic difference - A pulley is one of the six types of simple machines that have been used for humans for a long time. It is a basic mechanism. The sheave that is pronounced as shiv is part of the pulley. It is the wheel with grooves where the rope fits in to. Complimentary - Pulley without a sheave changes the direction of the pull to lift the load but it doesn’t change the force or energy required to lift the object. By adding multiple sheaves we get a mechanical benefit as it reduces the energy or force requir...
Read more

5 Symptoms of a Bad Drive shaft

Engines create torque which enables the rotation of the wheels. Drive Shaft are components that transfer the torque to the wheels for movement. In a front-wheel-drive car, a half shaft is needed and in a four-wheel-drive, a long shaft is needed. Sometimes four-wheel-drive will have two half-shafts as per the design of the vehicle. The shafts rotate quickly and in turn, rotate the wheels. This grueling exercise can make your power shaft worn out. Here are five symptoms that show that your shaft is not working properly:- 1. Intense Vibrations If you feel vibrations while driving your automobile that means that your shaft is showing signs of wear and tear. This is caused by worn out bushings in the shaft. The bushings are the component of the shaft that keeps it from vibrating. If your passengers can feel the vibration of the shafts then the problem can be severe and need urgent checking and replacement. The worst part of this malfunction is that it may even affect other parts i...
Read more